Drapery Fabrics
Fire Resistant Tests
National Fire Protection Association (NFPA) 701 (Small Scale). The NFPA 701-1989 (Large Scale).
ASTM E-84 Class 1 or A.
City of New York Board of Standards and Appeal Bulletin # 44 (Cal. No. 294-40-SR) CA 1237 Sm, California Fire Marshal Title 19 for Interior Material Qualification.
California Department of Forestry and Fire Protection, Office of the State Fire Marshall Section 13115 Registration No. F-23203
This fabric contains no Fiber Glass or Asbestos.
Test Information
Gas Fading: >4.0
Colorfastness-Crocking: Dry >4.0, Wet >3.0
Colorfastness to Washing-IIIA: Share Change >4.0
Colorfastness to Solvent Spotting: >3.5
Colorfastness to Light: 40 Hours >4.0
Care Instructions
Care Code P
Machine Wash – 120 F – 160 F Wash Darks Separately
Tumble Dry – medium – remove promptly, Use steam iron – low setting, Fabric softeners not recommended
Do Not Dry Clean
This fabric, in the form purchased, will meet NFPA standard 701 test Method 1 for curtains and drapes. Melfabco Inc. makes no representation or warranties and shall have no responsibility or liability for the fabrics meeting NFPA standards 701 test method 1 for curtains and drapes after any additional processing.
Wall Coverings (Tiara)
Tiara Acoustical Wallcovering
A uniquely engineered wallcovering made of 100% solution dyed fibers needlebonded into a continuous structure, then finished with a heat set, latex back to ensure fiber lock. This material is soft, flexible and acoustically absorbent, yet suitable for high-traffic areas. Its “self-healing” nature makes it ideal for Tack- able walls while its excellent pill/fuzz resistance makes it Velcro compatible.
Specifications:
Construction: Needlebond Pattern: Single Rib
Fiber: Solution Dyed PET Blend 50% Post Consumer Total Weight: 30. oz. Ln. yd.
Roll Size (W x L): 54” x 24 Ln. yd. (72” width by special order) Packaging: “Crush-Proof” Box
Flammability
NFPA-265:UBC 8-2 Passes
ASTM E-84 Tunnel Test Class A Sec. X 1.10.1
Acoustical
ASTM C-423-84A
Gypsum Board NRC .20 Acoustic Board NRC .60
Tenstile Strength
ASTM D-5034, (Lbs.), L x W
Break: 174x199
Elongation: 141x199
Tear (Trap) Strength
ASTM D-2261, (Lbs.) 47 x 34
Abrasion
TRL-609 Severe Random Tumble Pill – Moderate Fuzz - Slight
Colorfast
AATCC-165
Wet Crocking 5; No Stain Dry Crocking 5; No Stain
Electrostatic
AATCC-134 0.1 kv
Material Safety Data Sheets (msds) as it might pertain to Melfabco style Tiara, wall carpet, please review the following. According to the code of Federal Regulations, Title 29, Chapter XVII, Part 1910, Subpart Z, Paragraph (b) (5), the Hazard Communication Standard does not apply to an article. Finished wall carpet exhibits performance parameters that meet all of the requirements as specified in the definition of an article; therefore, the Hazard Communication Standard does not apply to wall carpet as a finished article.